Cable Railing Hardware for Sleeved Posts — Push-Lock® Turnbuckle Extended Length Hanger Bolt
The Push-Lock® Turnbuckle Hanger Bolt is an exposed, swageless, tensioning, face-mounted fitting that is suitable for level runs only, and is available for 1/8” and 3/16” diameter 1x19 stainless steel cable.
The Push-Lock® Turnbuckle Hanger Bolt can be used with any fitting on the opposite end of the run. This fitting consists of four separate pieces: the hanger bolt, the body, the lock nut, and the Push-Lock® Stud. The lag thread of the hanger bolt is driven into a pre-drilled hole in the face of wood end post. The lock nut is installed all the way onto the exposed machine thread of the hanger bolt first, followed by the body. The Push-Lock® Stud threads into the body, and the cable attaches to the stud fitting via our Push-Lock® locking wedge system which requires no special tools. Tension is created by using the body as a turnbuckle. Once sufficient tension is achieved, the lock nut is secured against the body to prevent the fitting from loosening.