Product Profile

3.30 Plus Block


CAD Drawings Amvic Building System 3.30 Plus Block
Amvic’s third generation ICF Amvic Plus 3.30 incorporates many of the proven, patented innovations of the first and second generation form and has been expanded to provide a stronger, more energy efficient and easier to install product.

The two EPS side panels have increased by 30% going from 2.5” to 3.25” per side for a total EPS width of 6.5” the wider EPS foam also increases the R value of the block from R22 to R30 making it the highest R value of any factory assembled block in the industry.
  • Due to the thicker EPS panels the webs are now able to be spaced every 8” on center making Amvic Plus 3.30 the only block in the industry to have the same form capacity as the Amvic 6” on center block. It is proven to be the strongest block in the industry according to CCMC (Canadian Construction Material Center) forming capacity test.
  • The Amvic FormLock™ interlocking system ensures a tight and secure interlock between the forms due to the 1” deep grooves that virtually align themselves, thus providing greater strength without the need for gluing or taping.
  • It has evolved to include an open recess on the interlock which provides water drainage to eliminate moisture build up in the interlock during wet installation conditions.

Pre-assembled Collections CLICK ON THE LISTING BELOW TO DOWNLOAD FILES Back To Top

CAD
3D
Specs
About
Media
Education
PrintCAD
Close
1
Typical Amvic 6 Inch Plus Forms
Close
2
Typical Amvic 8 Inch Plus Forms
Close
3
Typical Amvic Plus 6 Inch Taper Top Form
Close
4
Typical Amvic Plus 6 Inch Brick Ledge Form, Views
Close
5
Typical Amvic Plus 8 Inch Taper Top Form
Close
6
Typical Amvic Plus 8 Inch Brick Ledge Extension
Close
7
Typical Amvic Plus 6 Inch to 6 Inch Brick Ledge Form, Views
Close
8
Typical Amvic Plus 6 Inch Brick Ledge Extension
Close
9
Typical Amvic Plus 6 Inch Brick Ledge Form, Section & Details
Close
10
Typical Amvic Plus 6 Inch to 6 Inch Brick Ledge Form, Sections and Details

All Available 2D CAD Files Back To Top

CAD Drawings Amvic Building System Typical Amvic 6 Inch Plus Forms
Typical Amvic 6 Inch Plus Forms
View CAD
CAD Drawings Amvic Building System Typical Amvic 8 Inch Plus Forms
Typical Amvic 8 Inch Plus Forms
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus 6 Inch Taper Top Form
Typical Amvic Plus 6 Inch Taper Top Form
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus  6 Inch Brick Ledge Form, Views
Typical Amvic Plus 6 Inch Brick Ledge...
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus 8 Inch Taper Top Form
Typical Amvic Plus 8 Inch Taper Top Form
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus 8 Inch Brick Ledge Extension
Typical Amvic Plus 8 Inch Brick Ledge...
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus 6 Inch to 6 Inch Brick Ledge Form, Views
Typical Amvic Plus 6 Inch to 6 Inch...
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus 6 Inch Brick Ledge Extension
Typical Amvic Plus 6 Inch Brick Ledge...
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus  6 Inch Brick Ledge Form, Section & Details
Typical Amvic Plus 6 Inch Brick Ledge...
View CAD
CAD Drawings Amvic Building System Typical Amvic Plus 6 Inch to 6 Inch Brick Ledge Form, Sections and Details
Typical Amvic Plus 6 Inch to 6 Inch...
View CAD

All Available Specifications Back To Top

Typical Amvic Plus 8” Brick Ledge...
View Spec
Typical Amvic Plus 6” Brick Ledge Form
View Spec
Typical Amvic Plus 8” Taper Top Form
View Spec
Typical Amvic Plus 6” Taper Top Form
View Spec
Typical Amvic 8” Plus Forms
View Spec
Typical Amvic 6” Plus Forms
View Spec