400 Series Curtainwall
Designed for low- and mid-rise applications, the durable framework of the 400 Series Curtainwall provides exceptional structural performance reducing the need for steel reinforcing. This system has a sightline of 2-1/2" and the strength of variable-depth backmembers from 3-3/8" to 8". An exterior screw-applied pressure bar secures the glass.
Snap-on covers, available in a wide range of colors, allow for different finishes on interior and exterior exposed surfaces. Silicone-glazed verticals are available for a seamless appearance.
1.
400 Series Curtainwall/Ribbon Window
2.
400 Screw Spline Curtainwall/Ribbon Window
3.
400SS Screw Spline Cassette Curtainwall
4.
400 IG Series Curtainwall/Ribbon Window
5.
400 - Clip Installation
6.
400 - Outside Corner
7.
400 - Outside Corner - Captured 4 Inch System
8.
400 - 90° Outside Corner - Butt Glazed 4 Inch System
9.
400 - 90° Inside Corner - Butt Glazed 4 Inch System
10.
400 - Outside Corner -Butt Glazed 7 Inch System
11.
400 - 90° Outside Corner - 7 Inch Captured System
12.
400 - 90° Outside Corner - Captured 7 Inch System
13.
400 - 90° Inside Corner - Butt Glazed 7 Inch System
14.
400 - Corner
15.
400 - 90° Outside Corner - Butt Glazed 8 Inch System
16.
400 - 90° Inside Corner - 8 Inch Butt Glazed System
17.
400 - Door Jamb with Medium Stile - Offset Pivot or Butt Hinge
18.
400 - Door Jamb - Medium Stile with Continuous Hinge
19.
400 - Door Jamb with Narrow Stile - Offset Pivot or Butt Hinge
20.
400 - Door Jamb - Narrow Stile with Continuous Hinge
21.
400 - Door Jamb with Wide Stile - Offset Pivot or Butt Hinge
22.
400 - Door Jamb - Wide Stile with Continuous Hinge
23.
400 - Door Jamb - Offset Pivot or Butt Hinge - DRVS
24.
400 - Door Jamb - Offset Pivot or Butt Hinge - DRVS1
25.
400 - Door Jamb
26.
400 - Door Jamb - Center Pivot
27.
400 - Door Jamb - Offset Pivot or Butt Hinge - DRVS6
28.
400 - Glass Pocket Reducers & Pressure Plate Covers
29.
400 - Tubular Head
30.
400 - Head - HEAD1
31.
400 - Head - HEAD2
32.
400 - 4 Inch Open-Back Head/Jamb
33.
400 - Open-Back Head/Jamb 21.26c
34.
400 - Open-Back Head/Jamb 21.26e
35.
400 - 6 Inch Open-Back Head/Jamb
36.
400 - Open-Back Head
37.
400 - Open-Back Head/Roll Over Shear Block
38.
400 - Standard Horizontal
39.
400 - 5 Inch Silicone Glazed Horizontal
40.
400 - 5 Inch x 4 Inch Horizontal
41.
400 - 4 Inch x 4 Inch Horizontal
42.
400 - 4 Inch x 5 Inch Horizontal
43.
400 - Alternate Horizontal
44.
400 - Roll Over Horizontal
45.
400 - Roll Over Horizontal - From Bottom
46.
400 - Tubular Jamb
47.
400 - Jambs
48.
400 - Tubular Jambs with
49.
400 - Open Back Jamb
50.
400 - Miscellaneous Snap Covers -1/4 Scale 21.32
51.
400 - Miscellaneous Backmembers - 1/4 Scale 21.38
52.
400 - Miscellaneous Snap Covers -1/4 Scale 21.33
53.
400 - Miscellaneous Pressure Plates - 1/4 Scale
54.
400 - Miscellaneous Adapters - 1/4 Scale
55.
400 - Miscellaneous Backmembers - 1/4 Scale 21.36
56.
400 - Miscellaneous Backmembers - 1/4 Scale 21.37
57.
400 - Miscellaneous Backmembers - 1/4 Scale 21.39
58.
400 - Sill - SILL
59.
400 - Sill - SILL2
60.
400 - Sill - SILL3
61.
400 - Tubular Sill
62.
400 - 4 Inch Open-Back Sill
63.
400 - 5 Inch Open-Back Sill 21.26d
64.
400 - 5 Inch Open-Back Sill 21.26f
65.
400 - Open-Back Sill
66.
400 - 6 Inch Open-Back Sill
67.
400 - Vertical Splayed Corner
68.
400 - Splayed Mullion
69.
400 - 5 Inch Splayed Mullion
70.
400 - Splice Installation - E4TB223, E5TB223, E6TB223
71.
400 - Transom - Offset Pivot or Butt Hinge - TRAN
72.
400 - Transom - Offset Pivot or Butt Hinge - TRAN1
73.
400 - Transom - Offset Pivot or Butt Hinge - TRAN2
74.
400 - Transom - Offset Pivot or Butt Hinge - TRAN3
75.
400 - 5 Inch x 4 Inch Vertical
76.
400 - Silicone Glazed Verticals
77.
400 - Silicone Glazed Verticals - 1/4 Inch Glass
78.
400 - Intermediate Verticals
79.
400 - Elevation @ Head/Jamb Joint with
80.
400 - Elevation @ Head/Mullion Joint with
81.
400 - Elevation @ Sill/Mullion Joint with
82.
400 - 6 Inch x 3 3/4 Inch
83.
400 - 7 1/2 Inch x 5 1/4 Inch
84.
400 - 10 Inch x 7 3/4 Inch
