NAC Products
For more than 35 years NAC Products, Inc. has pioneered floor protection systems for the building industry. NAC manufactures sheet and liquid membranes for flooring installations that require protection from crack isolation, sound abatement and waterproofing.
NS 97 Primer
NS 97 Primer
NS97 is a non-flammable, solvent-based primer for use in exterior applications. NS97 is a pre-mixed methylene chloride formula that requires no thinning, establishes a permanent bond in 48 hours and will not re-emulsify.Application:Substrate temperature must be a minimum of 55ºF (13°C) for 24 hours prior to application.NS97 can be applied with a short nap roller, brush, trowel or sprayer. Allow NS97 to dry until tacky to touch, but non-transferable to finger. This may take as little as 10 minutes, but usually no more than 45, depending upon temperature, humidity, internal moisture level/porosity of substrate and application thickness.Tile may be set immediately after membrane is installed on horizontal surfaces. If water test is required, allow 48 hours to cure.
NS 97 Primer
NS 97 Primer
NS97 is a non-flammable, solvent-based primer for use in exterior applications. NS97 is a pre-mixed methylene chloride formula that requires no thinning, establishes a permanent bond in 48 hours and will not re-emulsify.Application:Substrate temperature must be a minimum of 55ºF (13°C) for 24 hours prior to application.NS97 can be applied with a short nap roller, brush, trowel or sprayer. Allow NS97 to dry until tacky to touch, but non-transferable to finger. This may take as little as 10 minutes, but usually no more than 45, depending upon temperature, humidity, internal moisture level/porosity of substrate and application thickness.Tile may be set immediately after membrane is installed on horizontal surfaces. If water test is required, allow 48 hours to cure.
- About
Asset Category Filters:
- Select All
- CAD PDF
- CAD DWF
- CAD DWG
- CAD GIF
- CAD VWX
- CAD DXF
Products in same Family
VIEWING
NS 97 Primer