NS 97 Primer
NS97 is a non-flammable, solvent-based primer for use in exterior applications. NS97 is a pre-mixed methylene chloride formula that requires no thinning, establishes a permanent bond in 48 hours and will not re-emulsify.
Application:
Substrate temperature must be a minimum of 55ºF (13°C) for 24 hours prior to application.
NS97 can be applied with a short nap roller, brush, trowel or sprayer. Allow NS97 to dry until tacky to touch, but non-transferable to finger. This may take as little as 10 minutes, but usually no more than 45, depending upon temperature, humidity, internal moisture level/porosity of substrate and application thickness.
Tile may be set immediately after membrane is installed on horizontal surfaces. If water test is required, allow 48 hours to cure.
Listing Back To Top
Design Visualizer
Design Visualizer
You need to be logged in to view & download files.
New to CADdetails?
Register to enjoy full access to unlimited 3D models, CAD drawings and specifications. It's free!