Formulated Materials
Formulated Materials product library including CAD Drawings, SPECS, BIM, 3D Models, brochures, etc.

Formulated Materials



Sound Attenuation: Treadstone® R1


Unlike many of our competitor’s products, the new R1 was tested using standard 18″ truss joist assemblies spaced 24″ o.c, with standard single layer batt insulation. We even used a standard, unbacked 2.5mm glue-down vinyl plank when testing. Specifying the new Treadstone  R1 requires no changes to your plans to achieve the specification listed. Full sound test data is available by contacting Formulated Materials.

Q-SEAM TECHNOLOGY
The New R1 utilizes our new Q-Seam Technology. This advancement provides a robust and monolithic foundation for the underlayment and ensures proper installation. Underlayments are typically installed with seams abutted and taped together, but this method often leads to small gaps being left after taping. These unsupported gaps will push down as the underlayment is applied, providing a point of direct contact between the underlayment and the sub-floor assembly. These valleys destroy acoustical performance and can lead to premature floor failure. The New R1’s innovative Q- Seam Technology addresses this issue by ensuring each seam is tightly overlapped and fastened during installation.

8-10x STRONGER THAN COMMONLY SPECIFIED MATS
THE NEW R1 DEFLECTS .07″ AT 10,019SPF 
(When tested per ASTM D1261).
Loading the floor to the point where this compression is possible will most likely cause more damage to the subassemblies than the underlayment itself. The building may well come down before the underlayment moves. Unlike typical monofilament mats, The New R1’s rigid structure also resists localized compression under the weight of small point loads. This compression reduces the dead air required for proper sound attenuation and increases contact surface area between the mat and the floor, resulting in a reduction in acoustical performance. The new R1 easily supports these loads from common items like loaded cabinets, refrigerators, washers, and other heavy appliances and furniture, ensuring that they will not impact acoustical performance.
CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1
CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1 CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1 CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1 CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1 CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1 CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1 CAD Drawings BIM Models Formulated Materials Sound Attenuation: Treadstone® R1

Listing Back To Top

Design Visualizer

Design Visualizer

Sound Attenuation: Treadstone® R1
Sound Attenuation: Treadstone® R1

Downloads



Company Resources