ROUNDED 90° AND 180° DRIVEWAY CORNERS AND BULLNOSES

Williams Stone Company's 90° driveway corners and 180° bullnoses can be ordered with the same surface finishes and edge details as the curbing with which they will be installed.

Corner Sizes

Williams Stone Company offers 90° driveway corners (quarter circle) in three different radii for use with square-back curbing having 5-, 6- and 7-inch exposure. Driveway corners are 16 to 18-inches deep.

Type A: 2-foot radius

Type B: 3-foot radius

Type C: 2.5-foot radius.

Bullnose End Sizes

Williams Stone Company offers bullnoses in two standard heights and three standard radii. Standard angle is 180º (half circle). Custom angles are available upon request (see 90º angle below).

16 to 18-inch height with 1-foot radius

16 to 18-inch height with 1.5-foot radius

16 to 18-inch height with 2-foot radius

Edge Detail Options

Straight edge (standard).

Buzzed: 1/4-inch camfer (or eased) edge.

Rounded edge: one or both edges are chamfered and then rounded off to 1/2-inch or greater radius.

Chamfer: 45-degree bevel is standard, 1/2", 3/4: or 1".

Beveled mountable: 45-dgree chamfer is standard, up to 3" x 3" or 4" x 4", or 5" x 5".